A tail fin is a device installed at the tail of an aircraft to enhance flight stability. The tail can be used to control the pitch, yaw and tilt of the aircraft to change its flight attitude. The tail is an important part of the flight control system. Damage will inevitably occur during use, so it is necessary to quickly obtain aircraft tail appearance data to provide accurate data solutions for later maintenance, repair and modification.

        The customer mainly wanted to obtain the data of the aircraft tail and conduct reverse modeling in the later stage. Since the traditional scanning method collects the large objects of the aircraft tail, it is unable to obtain accurate data for places with large angles between the curved surfaces. Therefore, the customer needs to find other suitable technologies to obtain data. Data to solve problems at work.

Actual pictures of the aircraft scene

        Customers looking for HOLON3D hope to use new 3D scanner equipment to scan quickly and obtain accurate data storage and reverse modeling. In the later stage, if you want to maintain and produce, you can use data to improve work efficiency.

Aircraft site signage map

        Use our  to conduct a comprehensive and rapid scan of the aircraft tail. The entire scan only takes 10 minutes. The scanning speed is fast, the accuracy is high, the stability is strong, the operation is convenient, and the scanning is flexible.

Aircraft tail STL data chart

        Import the scanned data into the post-processing software and perform reverse processing on the data to obtain the customer's needs. This greatly improves work efficiency, shortens the time required for work compared with before, and provides customers with high-precision data and data. The model solves the difficulty of obtaining data during work and provides reference data for later maintenance and transformation, speeding up the progress of the work.

Aircraft tail STL data chart

Aircraft tail STL data chart