- A +
- A
- A -
During the operation of the blast furnace, the charge flows from the material flow regulating valve to the distribution chute through a high drop, and is distributed to various positions of the furnace throat through the interference of the chute. The chute is prone to wear during the production process. Since the customer does not have a design drawing and cannot be repaired later, the 3D scanning technology is used to help obtain the surface data of the object, so that the reverse design can provide effective data assistance for repair and maintenance of wear.
Scanning map of chute
Practical problems
The chute has a large volume and a complex structure. It scans the required parts according to customer requirements. The details also need to be scanned accurately. The data can be obtained by rapid scanning. The scanning data has high accuracy and can be used for later reverse design. Using a general 3D scanner, the scan data is incomplete, and the data cannot be scanned in subtle areas. New 3D scanning technology is required to complete the scan.
Scanning map of chute
solution
Using our handheld 3D scanner HOLON751, this device has a scanning accuracy of up to 0.02mm, fast scanning speed, and fine mode scanning details, easy to use, simple to operate, and can quickly complete the scanning work.
STL data chart of chute scanning
First, mark points are pasted for positioning and stitching, and then a three-dimensional scanner is used to scan the scanned part in all directions to obtain high-precision data. The scanning can be completed in half an hour, and the work efficiency is high. Import the scanned data into the reverse software for processing and generate models, which can be innovatively designed and modified later to further design more suitable products on the existing basis, helping customers solve a major problem.
STL data chart of chute scanning
STL data chart of chute scanning
